The modern solution for investment casting
The best and the most famous jewellers, both Italian and world-famous, use
LUX
Specific: Lux's family is a wide range of master alloys purposely
planned for casting.
Reliable: the particular chemical elements are perfectly adjusted
and stictly controlled to optimize the castability of these master alloys.
Shiny: the castings are, after casting, particularly deoxidized and clean, a
fundamental feature, for example, for the castings with stones in place.
Main characteristics
- optimal mould filling capability
- deoxidized casts
- reduction of gas
porosity
- reasonable shrinkage defects
- shrinkage defects concentrated
inside the casts section (for some of the very last items of which the range was
enriched)
Lux master alloys are available for yellow gold, white Nickel or Palladium white
gold, red gold, green gold and silver. Flexia master alloys are available for yellow
gold, white Nickel or Palladium gold, red gold, green gold and silver.
It is now available LUX plus, a further advance in Lux's family.
Lux plus is made perfect by a lower melting range, which reduces
the interaction between the metal and the investment, and by particular microalloying
elements, allowing to achieve a high final quality with an action aimed
to remove any kind of defect from the surface.
Discover how in our new catalogue!
|
